DC Engineering is the world’s populist manufacturer and supplier of Nickel 200/201 Nuts to all over the world. We provide various shapes and sizes of fasteners, for our valued customers. We have quality assurance and quality control both as well for highest satisfaction to our customers.
Nickel 200 Nuts offers good weldability and corrosion resistance from various atmospheres including pitting and crevice corrosion. Due to the high ductility, and toughness this grade is widespread fasteners across all different applications. Nickel 201 Nuts is also a good grade of nickel steel for low environmental conditions as much as -450 degree Fahrenheit, and low magnetic permeable atmosphere as well. Nickel 201 nuts is generally used at the temperature range from 1150-1035 degree celsius in the constant functioning environment to intermittent operations depending upon once one needs. Nickel 200 Nuts offers greater corrosion resistance, and annealing is usually done at 1900 degree fahrenheit, followed by rapid cooling. The general hot working that is performed by Nickel 200 Nuts is done after the continuous heating at the temperature of 1177 degree celsius.
We use Nickel 200 and 201 Fasteners in high speed steel tooling that equates to about 70 surface/min due to forming operations that should be performed under the room temperature at any time. For fasteners heat rejection copper back-up plates are functional, nevertheless to prevent cracks in the solder metal Nickel 200 nuts strictly do not permit surface-fuse the copper back up plate for better results.
Largest Inventory
Customer Support
On Time Deliveries
ISO 9001 : 2015
Specification :-
| Specification | ASTM B 160 ASME SB 160, UNS 2200 Nuts |
| Standard | DIN, UNI, ISO, JIS, GB, IS, BS, ASME, ANSI, ASTM and all International Standards |
| Size | M2, M2.5, M3, M4, M5, M6, M8, M10, M12, M14, M16, M20, M24, M30, M36 to M160 | Custom Sizes |
| Length | 3 mm to 200 mm | Custom Sizes |
| Dimensions | DIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3 |
| Form | Hex, Threading, Square, Round as per Gauge Etc. |
| Threads | Unless otherwise specified, the threads shall be rolled or cut and tapped horizontally or vertically |
| Threads available | UNF, BSW, BSF, METRIC, UNC, or as required |
| Threads Configuration |
ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads |
| Certification | Dual Certified As per ASTM & ASME Codes |
| Test Certificate | As per EN 10204 / 3.1 Manufacturer Test Certificate, PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified |
| Raw materials Source | JSPL, Mukund Steel, Tata Steel, Dhamm Steel, Usha Martin,etc. |
| Packing | IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request |
| Surface Coating |
Cadmium Coating Hot Dipped Galvanizing Coating Ptfe Coated Nickel Alloy 200 Fasteners Phosphate Coating Teflon Coating Xylon Coating Zinc Coating |
Equivalent Grades
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Nickel 200 | 2.4066 | N02200 | NW 2200 | NA 11 | НП-2 | N-100M | Ni 99.2 |
| Nickel 201 | 2.4068 | N02201 | NW 2201 | NA 12 | НП-2 | - | LC-Ni 99 |
Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
| Nickel 200 | 0.15 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min |
| Nickel 201 | 0.02 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min |
Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Nickel 200 / 201 | 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
Applications & Operations
We at DC Engineering make sure that our every product is made of high quality raw material. We thoroughly test each and every product before dispatching it to our customers. DC Engineering is one of the most trusted manufacturers and suppliers of fasteners and bolts which are applicable in various industries.
- Gas Processing Industries
- Petrochemical Industries
- Power Generation Industries
- Food Processing Industries
- Chemical Industries
- Oil & Gas Industries
- Fertilizers Industries
- Sugar Industries
Experimentation & Testing
DC Engineering is known for its accurate and perfect dimensions. We at DC engineering thoroughly test all our products before shipping them to the customers. We carry out destructive as well as non-destructive tests on all our products.
- Impact Analysis
- Eddy Current Examining
- Power Generation Industries
- Hydrostatic Analysis
- Prompt Test
- Positive Material Recognition
- Large-Scale Test
- Pitting Protection Test
Packaging & Dispatching
DC Engineering uses the most safest and the most effective ways of packaging for all types of deliveries. We pack our goods in various ways such as:
- Wooden Boxes
- Wooden Crates
- Wooden Pallets
- Carton Boxes
- Shrink-Wrapped
- Bubble Wrap Packing Material
- Laminated & Metallized Films
- Wooden or Plastic Crates
Cities We Export
Srinagar, Tamil Nadu, West Bengal, Vijayawada, Maharashtra, Rajkot, Karnataka, Akola, Amravati, Kanpur, Aurangabad, Andhra Pradesh, Saharanpur, Vasai, Varanasi, Faridabad, Bhadreswar, Jhansi, Nashik, Solapur, Surat, Nagpur, Raipur, Haryana, Buxar, Bhavnagar, Pune, Punjab, Banswara, Uttar Pradesh, Tadepalligudem, Manipur,Delhi, Dhanbad, Guntur, Gujarat, Ludhiana, Kalyani, Nagapattinam, Benin, Vadodara, Kerala, Patna, Ulhasnagar, Chhattisgarh, Mizoram, Chennai, Kurnool, Datia, Mangalore, Ambala, Kota, Miryalaguda, Orissa, Mumbai, Nagda, Bikaner, Ballia, Allahabad, Suryapet, Jaipur, Haora, Durgapur, Udgir, Jodhpur, Amritsar, Kalyan, Bangalore, Puducherry, Agra, Kolkata, Tirunelveli, Gujarat, India, Lucknow, Meerut, Dehradun, Bihar, Ujjain, Jharkhand, Ahmedabad, Coimbatore, Sadar, Jamnagar, Hyderabad, Chandigarh, Ranchi, Jamalpur, Ambattur, Jabalpur, Waghala, Nagaur, Gulbarga
Countries We Export
Iran, Ecuador, Mexico, Afghanistan, Bulgaria, Denmark, Kenya, Singapore, Portugal, Venezuela, Sri Lanka, Chile, Gabon, Colombia, Belgium, Peru, Belarus, Yemen, Thailand,France, Italy, Mexico, Greece, Kuwait, Romania, Iraq, Netherlands, Sweden, Switzerland, Lithuania, Lebanon, Poland, Philippines, United Kingdom, Norway, Angola, Kazakhstan, Taiwan, Nigeria, Poland, China, Nigeria, Spain, Mongolia, New Zealand, United States, Hungary, Libya, Serbia, Ukraine, Finland, South Africa, Iran, Vietnam, Israel, Czech Republic, Slovakia, Hong Kong, Azerbaijan, Qatar, Japan, Oman, Malaysia, Pakistan, Algeria, Bangladesh, Jordan, Indonesia, Russia, United Arab Emirates, Brazil, Estonia, Turkey, Austria, Croatia, Ghana, Bahrain, Korea, Canada, Bolivia, Costa Rica, Trinidad & Tobago, Tunisia, Chile, Morocco, Bhutan, Argentina, Egypt